Watlow EM Gateway Manual do Utilizador

EM Gateway User’s ManualFor Watlow part number EM00-GATE-00001241 Bundy Boulevard, P.O. Box 5580, Winona, Minnesota USA 55987-5580 Phone: +1 (507) 45

10Chapter FourHTML PagesThe section describes the pages available from the EM Gateway’s Web server.When the web page is first accessed, you are prompt

11Use this page to disable or enable automatic page refreshing or to change the time in betweenrefreshes.In addition, you can force a rescan of the Mo

12Use this page to change the Gateway identification name or to change the IP Address ResolutionMethod. Contact your IS administrator for questions re

13Use this page to enable notification and configure the addresses for email recipients. These recipientswill receive an email when an alarm occurs on

14Use this page to update the time and date stored in the Gateway. This information is used to identifythe time and date of alarms when emails are sen

151 0 0 0 0 1174 02 0 0 0 0 1174 03 0 0 0 0 1174 04 0 0 0 0 1174 05 0 0 0 0 1174 06 0 0 0 0 1174 07 0 0 0 0 1174 08 0 0 0 0 1174 09 0 0 0 0 1174 010 0

16This page was loaded Wed Feb 1318: 00:28 2002 IP Address 7.3.37.91Subnet 255.255.224.0Gateway 7.3.63.250Mac Address 00:03:AA:00:00:C1Receives 128349

17Chapter FiveController Parameters and RegistersThe EM Gateway supports the following parameters for each type of controller when using an HTTPbrowse

18Series 988 / 989Operation Mode – register 10 with choice of Auto or Manual as read onlyInput Error – register 4 with choice of Sensor Error or Ok as

19Series F4POperation Mode – register 200 with choice of Auto or Manual as read onlyInput 1 Error – register 101 with choice of Sensor Error or Ok as

2EM GatewayTable of ContentsChapter 1: Product Overview 4Ethernet Gateway 4Ethernet Gateway Architecture 4Program Upgrades 5Chapter 2: Installation a

20CLS200 Series (Loop 1 to 16 if available)Operation Mode – register 264 to 279 with choice of Auto or Manual as read onlyInput Error – registers 660

21

22

23

24

25Chapter SixReference DocumentsThe MODBUS RTU specification is located at: http://www.modicon.com/techpubs/toc7.html orhttp://www.modbus.orgSerial Nu

26Chapter SevenSpecificationsPower supply• Voltage input 24 V (ac/dc) +10%, -15% 50/60 Hz +/- 5• Connection through 2-position removable screw style

27Declaration of ConformityGateway ProductsWatlow Winona, Inc.1241 Bundy Blvd. Winona, MN 55987 USADeclares that the following product:Model Numbers:

28How to Reach UsTechnical AssistanceIf you encounter a problem with your EM Gateway, review all of your wiring and configuration informationto verify

3EM GatewayTable of Contents – cont.Chapter 6: Reference Documents 25Reference Documents 25Serial Numbers 25Chapter 7: Specifications 26Power Supply 2

4Chapter OneProduct OverviewThe EM00-GATE-0000 is a gateway / bridge that allows up to 32 Watlow controllers to be directlyconnected to an Ethernet ne

5Program UpgradesThe gateway has a TFTP server for the purposes of reprogramming the program memory. A programupdate will be initiated when a TFTP cli

6Chapter TwoInstallation & WiringUL Approved, Class 2 power supplyrequired

7Dimensions are in inches

8Chapter ThreeConfigurationGetting StartedPerform these steps;1. Connect the EM00-GATE-0000 gateway to your computer’s Ethernet port using a cross-wi

9You will need to configure your Gateway with your SMTP server name or address. A DNS server addressmust also be configured if using a SMTP name. Cont