Watlow MINICHEF 2000 Griddle Applications Manual do Utilizador descarregar pdf (Página 35)

34 ■ Watlow MINICHEF 2000 Application 23

Auto-tuning Note:

Before auto-tuning Application 23, [teNp1] in the operations menu must first be set to

a value that is typical of your application (See the Hardware & Software Setup Guide

for information on programming menus.). Then set [tHerl] / [tunE1] to [```on].

After you accept [```on], by pressing “Enter,” the controller will display [`tunE]

while auto-tuning is taking place.

The controller will cancel the auto-tuning process if it cannot be completed in 80 min-

utes. You can cancel the auto-tuning process at any time by pressing either key C or key

D and accepting [``Off], by pressing “Enter,” when it appears.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Sem comentários

Watlow MINICHEF 2000 Griddle Applications Manual do Utilizador Página 35