Watlow Series 734 Program Manual do Utilizador descarregar pdf (Página 10)

Operation, Chapter 4

WATLOW Series 733/734 Program Manual

Operation

Running a Menu

Press the appropriate menu key

, that menu is activated. The LED's above the

Time key and menu key are lit. The time programmed for each step in the menu is

added together and begins counting down. Once the combined menu time is

complete, the audible alarm sounds and the menu LED flashes. Press the menu

key again to stop the audible alarm. If not, the alarm will sound for 15 seconds.

Before a menu can be started, menu time must be programmed.

Viewing Temperature While Running a Menu

• To view a menu's process temperature while executing a program, press the

temperature key .

• The display shows the temperature for Zone 1 [``80].

• Press the Temperature key again and the Zone 2 process temperature is

displayed.

• Press the Time key to return to your menu countdown time.

Stopping a Menu

• To stop a running menu, press the active menu key.

• The display reverts back to [0)º0].

• The 733/734 now controls at the temperature [``80].

Entering The Review Mode

• Press the Temperature key for 5 seconds. You are in the Review mode.

When a menu is running, you will not effect the menus program status.

• The [nEnU] prompt is displayed. Press the menu to review.

• Press the Time key to cycle through the selected menu.

• To exit the Review mode, press any menu key. The control reverts to the last

active menu and/or step. To review more than one menu, exit the Review mode

and re-enter.

• After 1 minute with no key activations, the unit reverts to the Operation mode.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Sem comentários

Watlow Series 734 Program Manual do Utilizador Página 10