Watlow Relay Interface Board Manual do Utilizador descarregar pdf (Página 13)

Relay Interface Board Installation Guide

9

TABLE 2. Jumper Positions

Jumper Jumper Position A Jumper Position B

Jumper Position C

(JU3 only)

JU1 Controller supplies

+5 Vdc to power both

24-module I/O boards.

TB1 terminal 1 can

supply power to a

32-module I/O board.

Controller power supply

is disconnected. TB1

terminal 1 can connect

+5 Vdc power from an

external supply to both

24-module I/O boards.

JU2 Module 3 (on the I/O

board connected to

connector J2) is con-

nected to the control-

ler’s digital input 1. The

module should be an

input module.

Module 3 (on the I/O

board connected to con-

nector J2 is connected

to controller digital out-

put 34. The module

should be an output

module.

JU3 Module 2 (on the I/O

board connected to con-

nector J2) is connected

to the controller’s pulse

input. The module

should be an input

module.

Module 2 (on the I/O

board connected to con-

nector J2) is connected

to the controller’s digital

input 2. The module

should be an input

module.

Module 2 (on the I/O

board connected to

connector J2) is con-

nected to the control-

ler’s digital output 33.

The module should be

an output module.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Comentários a estes Manuais

Sem comentários