Watlow LogicPro Manual do Utilizador descarregar pdf (Página 209)

100

101

LogicPro User’s Guide Chapter 12: Function Blocks

Doc.# 28002-00 Rev 3.00 Watlow Anafaze 193

PPC-2010 Processor Module Addressing Example

To create a variable named My_Dig_Out that sets the value of the

output on a PPC-2010 module, set the options in the Add

Program/Resource Variable dialog box as illustrated below.

NOTE! The PPC-2010's module address is 0 (zero).

Analog_In_202x

The Analog_In_202x driver supports the inputs on the PPC-202x

series Analog In modules:

To associate a variable with an analog input:

1. Open the Add Program/Resource Variable dialog box.

2. Enter a unique variable Name.

3. Select INT from the Type list.

4. Select Input by clicking the check box.

5. Select Analog_In_202x from the IO Driver list.

6. Select WORD from the IO Size list.

7. Enter the IO Physical Address. The address is:

X.Z X is the module address (1-4)

Z is the module I/O number (1-32).

8. Click [OK].

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 295 296

Comentários a estes Manuais

Sem comentários

Watlow LogicPro Manual do Utilizador Página 209

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Watlow LogicPro