Watlow LogicPro Manual do Utilizador descarregar pdf (Página 227)

100

101

LogicPro User’s Guide Chapter 12: Function Blocks

Doc.# 28002-00 Rev 3.00 Watlow Anafaze 211

3. Select INT from the Type list.

4. Select Input by clicking the check box.

NOTE ! A variable using the CPC400_PV driver should al-

ways be an input an never an output. To set the in-

put to a loop with a logic program, use a soft

input.

5. Select CPC400_PV from the IO Driver list.

6. Select WORD from the IO Size list.

7. In IO Physical Address field, enter the channel number (1

to 5 for CPC404; 1 to 9 for CPC408).

8. Click [OK]

CPC400_PV Addressing Example

To create a variable named My_PV_3 that reads the value of

the channel 3’s process variable, set the options in the Add

Program/Resource Variable dialog box as illustrated

below.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 295 296

Comentários a estes Manuais

Sem comentários

Watlow LogicPro Manual do Utilizador Página 227

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Watlow LogicPro