Watlow Series SD6 PID Controller with DeviceNet Addendum Manual do Utilizador descarregar pdf (Página 15)

Watlow Series SD6 PID with DeviceNet ■ 15 ■

Attribute # Access Rule Name DeviceNet

Data Type

Description of Attribute Semantics of Values

121 Get/Set Set Point High Limit mA

and volts

DINT Set the high range for the

set point

Set Point Low Limit +

0.001 to 9999, if Input

Type = mA or Volt (default

= 9999)

(* 1000)

122 Get/Set Input Filter USINT Select filtering action (1) OFF (no filtering,

default)

(1) Filter display only

(2) Filter control input only

(3) Filter both

123 Get/Set Filter Value UDINT Set the input filter value, units

in seconds

0.0 to 60.0 (default = 0.0)

seconds (* 1000)

124 Get/Set Output 1 Function USINT Set the output 1 function (0) OFF

(1) Process Alarm

(2) Deviation Alarm

(3) Heat Control (default)

(4) Cool Control

125 Get/Set Control Method 1 USINT Set the output 1 control type

Only used with PID control

(1) Fixed Timed Base

(default)

(1) Variable Time Base

126 Get/Set Fixed Time Base 1 USINT Set the time base for fixed

time based control

1.0 to 60.0 if Output 1 is a

mechanical relay

0.1 to 60.0 if Output 1 is

not a mechanical relay

Defaults:

20.0 mechanical relay

5.0 solid-state relay

1.0 switched DC

127 Get/Set Power Limit 1 UINT Set the maximum power out-

put for a control output

0.0 to 100%

(default = 100%)

128 Get/Set Output Power Scale Low 1 USINT Set the low end of the range

within which the output will

scale

0 to 100%

(default = 0)

129 Get/Set Output Power Scale High 1 USINT Set the high end of the range

within which the output will

scale

0 to 100%

(default = 100)

130 Get/Set Output Non-linear Function

USINT Select a non-linear output

curve to match the response

of your system

(0) OFF (default)

(1) Curve 1

(2) Curve 2

131 Get/Set Analog Output 1 Units USINT Set the analog output units (0) Milliamperes (default)

(1) Volts

132 Get/Set Analog Output 1 Low Scale

UDINT Set the low scale for analog

outputs

0.00 to 20.00 mA if output

is set to mA (default =

0.00) (* 1000)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comentários a estes Manuais

Sem comentários

Watlow Series SD6 PID Controller with DeviceNet Addendum Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Watlow Series SD6 PID Controller with DeviceNet Addendum