Watlow Silver Series Addendum Manual do Utilizador descarregar pdf (Página 22)

Silver Series OIT  22  Watlow Addendum

Add an Option List for Control Mode

This example assumes you have created a window in a project that communicates with a Watlow

Controller and that window is open in EasyBuilder5000.

1) On the Objects menu,

click Button then

choose Option List.

2) Click the General tab.

3) In Description type

Control Mode.

4) Set Mode to Drop-

down list.

5) Set No. of states to 3.

6) In the Control address

group:

• For PLC name choose

Modbus RTU Master or

Modbus TCP/IP Master.

• Click Setting…

• For Device type choose

4x.

• In Address enter the

address of the Control

Mode. See the table.

• Select the data type in

the field below the

Address field.

• Click OK to close the

Address dialog

7) Click the Mapping

tab.

(019)

For this controller…

This

parameter…

Enter this

Address*…

Choose this

Data Type…

RMCxxxx-xxxxxxx

Control Mode

2221

16-bit Unsigned

RMHx-xxxx-x1xx

4101

16-bit Unsigned

PMxxxxx-xxxxxxx

1881

16-bit Unsigned

STxx-xxMx-xxxx

222

16-bit Unsigned

ST via RUI Gateway

1881

16-bit Unsigned

Other Controllers

Consult the controller manual.

*These addresses have already been changed to the absolute form required

for EasyBuilder5000 by adding 1 to the value listed in the Watlow manual.

Enter them as listed.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Comentários a estes Manuais

Sem comentários

Watlow Silver Series Addendum Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Watlow Silver Series Addendum