
Watlow EZ-ZONE
®
RME Module • 78 • Chapter 5 Factory Page
Expansion Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Probus
Index
Param-
eter
ID
Data
Type
& Read/
Write
[CUSt]
[FCty]
Custom Setup Menu
[`par]
[ Par]
Custom Menu
Parameter 1 to 20
If optional RUI is acquired select
the parameters that will appear
in the Home Page.
The Parameter 1 value will ap-
pear in the upper display of
the Home Page. It cannot be
changed with the Up and Down
Keys in the Home Page.
The Parameter 2 value will ap-
pear in the lower display in the
Home Page. It can be changed
with the Up and Down Keys, if
the parameter is a writable one.
Scroll through the other Home
Page parameters with the Ad-
vance Key
.
[nonE] None (61)
[`C_F] Display
Units (156)
[USr;r] User Restore
Set (227)
[`A;Lo] Alarm Low
Set Point (42)
[`A;hi] Alarm High
Set Point (78)
[`A;hy] Alarm Hys-
teresis (97)
[CU;st] Custom (180)
1 = None
2 = Dis-
play
Units
3 = Alarm
Low Set
Point
4 = Alarm
High Set
Point
5 to 20 =
None
- - - - - - - - - - - - 14005
uint
RWES
[`iid]
[ [ iid]
Custom Setup (1 to 20)
Instance ID
Select the instance of the pa-
rameter selected above to be
displayed.
1 to 16 - - - - - - - - - - - - 14003 int
RWES
[`LoC]
[FCty]
Security Setting Menu
[LoC;o]
[LoC.o]
Security Setting
Operations Page
Use to change the required se-
curity level clearance required
to gain access to the Operations
Page.
1 to 3 2
6942 0x67 (103)
1
2
- - - - 3002
unit
RWE
[pas;e]
[LoC.P]
Security Setting
Password Enable
Turn Password Enable ON if a
Password access feature is de-
sired. This is in addition to Read
Lock or Write Security.
[`off] Off
[``on] On
Off
- - - - - - - - - - - - - - - -
- - - -
Note: Some values will be rounded off to fit in the four-character display. Full values can
be read with another interface.
If there is only one instance of a menu, no submenus will appear.
R: Read
W: Write
E: EE-
PROM
S: User
Set
Comentários a estes Manuais